Implementasi SDGs-12 melalui inovasi bio-leather limbah ampas sagu untuk potensi produk kerajinan lukis aplikatif

Bayu Aji Suseno, Putri Prabu Utami, Winta Tridhatu Satwikasanti, Ponimin Ponimin, Rony Rony, Anwar Hidayat

Abstract


The number of sago processing industries in Jayapura Regency has the potential to increase sago pulp fiber waste that is still not being optimally utilized. This study aims to address the problem of sago pulp waste by turning it into functional and aesthetic handicraft products using painting techniques. The design was carried out through exploration using the research through design (RTD) method, which consists of the stages of understanding material characteristics, exploring materials, and implementing materials. Data collection techniques used observation and interviews to gain an in-depth understanding of the sago waste processing from sago starch (flour) processing from sago trunk (tokok) grating, extraction, sedimentation, and drying. Samples of sago pulp waste were taken from the sago forest located in Kampung Harapan, Sentani District, East Jayapura Regency. The sample characteristics in the research population were two-week-old sago pulp fiber waste that had been crushed from the sago processing of sago pith or trunk contents. The result of this research is a composite sheet in the form of bio-leather from sago pulp waste that is used as a material for making fashion products. This research focuses on the application of a green economy by developing craft raw materials to support Sustainable Development Goals (SDGs) number 12, namely responsible consumption and production.


Keywords


ampas sagu, komposit, bio-leather, lukis aplikatif, sdgs

Full Text:

PDF

References


Adawiyah, R., & Dirgantoro, M. A. (2019). Karakteristik Produksi dan Pendapatan Pengolah Sagu (Metroxylon spp.) pada Agroekologi Tanaman Sagu yang Berbeda di Kota Kendari. Berkala Penelitian Agronomi, 7(2), 130-138. http://dx.doi.org/10.33772/bpa.v7i2.10569

Ahmad, F.B., Williams, P.A., Doublier, J.L., Durand, S., & Buleon, A. (1999). Physico-Chemical Characterization of Sago Starch, Carbohydrate Polymers, 38(4), 361-370. https://doi.org/10.1016/S0144-8617(98)00123-4

Ardella, V. (2023). Fast Fashion dan Implementasi SDGS 12.6.1 Di Indonesia: Kewajiban Laporan Keberlanjutan Perusahaan. MODA, 5(2). 41-58. https://doi.org/10.37715/moda.v5i2.4107

Ashari, H. P., Rosida., & Priyanto, A. D. (2023). Characteristics of Milkfish Sausage (Chanos Chanos) and Carrots (Study of Proportions of Tapioca Flour: Taro Starch and Addition of Egg White). JITIPARI: Jurnal Ilmiah Teknologi dan Industri Pangan, 8(2), 139-154. https://ejurnal.unisri.ac.id/index.php/jtpr/article/view/9021

Asikin, I. R. (2019) Kontribusi Sustainability Performance Terhadap Sustainable Development Goals Pada Laporan Keberlanjutan PT Pupuk Kalimatan Timur. Skripsi. Universitas Brawijaya.

Bantacut, T. (2011). Sagu: Sumberdaya untuk Penganekaragaman Pangan Pokok. Pangan, 20(1), 27-40. https://doi.org/10.33964/jp.v20i1.6

Capah, B. M., Rachim, H. A., & Raharjo, S., T. (2023). Implementasi SDG'S-12 melalui Pengembangan Komunitas dalam Program CSR. Share: Social Work Journal, 13(1), 150-161. https://doi.org/10.45814/share.v13i1.46502

Citroreksoko, P., Sutanto., Taufik. A., Jamaludin., Muharini, A., Purawisastra, S., Suchyadi., Y., & Inawati. (2016). Kimia Terapan. Tangerang Selatan: Universitas Terbuka.

Dahlan, K., Kawari, M. M., Bella, H.I.K. & Togibasa, O. (2022). Layanan Penerapan Karbon Aktif sebagai Media Penyaring Air di Lingkungan SMA Negeri 4 Jayapura. Bakti Hayati, Jurnal Pengabdian Indonesia. 1(2), 37-42. https://doi.org/10.31957/bhjpi.v1i2.2395

Fifendy, M. (2017). Mikrobiologi. Jakarta: Kencana.

Flach, M. (2005). A Simple Growth Model for Sago Palm. Molat Ambuturus and it's Implications for Cultivation. Abstracts of the Eight International Sago Symposium in Jayapura, Indonesia. Japan Society for The Promotion Science.

Hartono, Rifai, M., & Subawi, H. (2016). Teknik Pengenalan Komposit. Yogyakarta: Deepublish Publisher.

Intariani, N. P., Puspawati, G. A. K., & Wisaniyasa, N. W. (2022). Pengaruh Konsentrasi Carboxyl Methyl Cellulosa (CMC) Terhadap Karakteristik Bubuk Daun Singkong (Manihot esculenta Crantz) dengan Metode Foam Mat Drying. Jurnal Ilmu dan Teknologi Pangan (ITEPA), 11(4), 744-755. https://doi.org/10.24843/itepa.2022.v11.i04.p14.

Istikowati, W. T., Sutiya, B., Sunardi, S., & Sunardi, S. (2021). Pemanfaatan Limbah Sagu Sebagai Bahan Pakan Ternak di Desa Pemakuan Laut, Sungai Tabuk, Kabupaten Banjar, Kalimantan Selatan. PengabdianMu: Jurnal Ilmiah Pengabdian Kepada Masyarakat, 6(2), 149-155. https://doi.org/10.33084/pengabdianmu.v6i2.1822

Karlsson, H. (2006). Fibre guide: Fibre Analysis and Process Applications in the Pulp and Paper Industry. Swedia: AB Lorentzen & Wettre.

Kondo, Y., Arsyad, M., Rusdi, M., Mansur, I., Dullah, M. J. (2022). Pengaruh Larutan Natrium Hidroksida Terhadap Kekuatan Komposit Serat Sabut Kelapa. Sinergi, 20(1), 96-102. http://dx.doi.org/10.31963/sinergi.v20i1.3467

Lestari, M., Setyawati, D., & Nurhaida. (2018). Karakteristik Papan Partikel dari Ampas Sagu dan Perekat Asam Sitrat Berdasarkan Kerapatan Papan. Jurnal Hutan Lestari, 6(2), 428-437. https://doi.org/10.26418/jhl.v6i2.26163

Lisa, M., Lutfi, M., dan Susilo, B. (2015). Pengaruh Suhu dan Lama Pengeringan Terhadap Mutu Tepung Jamur Tiram Putih (Plaerotus Ostreatus). Jurnal Keteknikan Pertanian Tropis dan Biosistem, 3(3), 270-279. https://doi.org/10.21776/jkptb.v3i3.293

Mauksch, M., & Tsogoeva, S.B. (2018). Spin-paired Solvated Electron Couples in Alkali-ammonia Systems. Physical Chemistry Chemical Physics, 44, 27740-27744. https://doi.org/10.1039/C8CP05058A

McClatchey W., Manner, I.H., & Elevitch, R.C. (2006). Metroxylon sp. London: Ecology Papers Inc.

Murtiono, A. (2012). Pengaruh Quenching dan Tempering Terhadap Kekerasan dan Kekuatan Tarik serta Struktur Mikro Baja Karbon Sedang untuk Mata Pisau Pemanen Sawit. Jurnal e-Dinamis, 2(2), 57-70.

Pancapalaga, W., & Nurjannah, N. (2020). Evaluasi Pewarnaan Kulit Samak Kelinci Mimosa Menggunakan Ekstrak Kulit Buah Naga (Hylocereus polyrhizus). Jurnal Peternakan Indonesia (Indonesian Journal of Animal Science), 22(3), 313-320. https://doi.org/10.25077/jpi.22.3.313-320.2020

Prawirosentono, S. (2011). Manajemen Operasi Analisis dan Studi Kasus. Jakarta: Bumi Aksara.

Raharjo, T. (2013). Penciptaan Seni Kriya: Persoalan dan Model Penciptaan. Prosiding Mengembangkan Disiplin Penciptaan dan Pengkajian Seni, Pengembangan Model Disiplin Seni ISI Surakarta 2013.

Rahmawan. (2011). Prinsip Dasar Pengeringan. Jurusan Teknologi Industri Pertanian. Bogor: IPB.

Ridwan, K. A. (2018). Prototipe Pengering Tenaga Surya Ditinjau dari Penggunaan Kolektor Termal Ganda dan Sistem Fotovoltaik. Jurnal Kinetika, 9(1), 7-14. https://jurnal.polsri.ac.id/index.php/kimia/article/view/2286

Sarah, S. (2014). Pengaruh Pola Tusuk Dasar Menjahit Terhadap Lebar Kain Saat Dikenai Beban. JPS: Jurnal Pendidikan Sains, 2(2), 1-3. https://doi.org/10.26714/jps.2.2.2014.

Simanihuruk, K., Chaniago, A., & Sirait, J. (2011). Silase Ampas Sagu sebagai Pakan Dasar pada Kambing Kacang Sedang Tumbuh. Prosiding Seminar Nasional Teknologi Peternakan dan Veteriner 2011.

Soedarso, Sp. (2006). Trilogi: Penciptaan, Eksistensi dan Kegunaan Seni. Yogyakarta: ISI Yogyakarta.

Timisela, N. R., Siahaya, W. A., Polnaya, F. J., & Hehanussa, A. M. (2023). Pelestarian dan Penguatan Eksistensi Tanaman Sagu. Yogyakarta: Deepublish Publisher.

Von Elbe, J. H. & Schaller, R. (1968). Hydrochloric Acid in Isolating Anthocyanin Pigments from Montmorency Cherries. Wiley, 33(4), 442. https://doi.org/10.1111/j.1365-2621.1968.tb03650.x




DOI: https://doi.org/10.24821/productum.v8i2.14428

Refbacks

  • There are currently no refbacks.


p-ISSN 2477-7900  |  e-ISSN 2579-7328


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


Like & Follow Us