Perancangan kursi duduk-berdiri berdasarkan pendekatan antropometri di PT. Otscon Safety Indonesia

Rizki Fitrian

Abstract


The problem of incompatibility between facilities and humans is still found, where the impact is the insecurity of worker safety, increased workload, disruption of work processes, and their effects on workers' conditions. PT. Otscon Safety Indonesia is a manufacturing company that manufactures automotive components called the Lever Parking Brake. The company has an assembly work station called Button Release Assy, where the work is done in a standing work position, so that operators will quickly feel fatigue from working in a standing position.This study aims to design a Sit-and-Stand Chair, so that operators working at the button release work station do not experience fatigue quickly. The design of the Sit-and-Stand Chair is based on the Anthropometric approach to create an ergonomic chair. The size of the chair is determined based on the results of the percentile calculation of body dimensions, where the body dimensions used are the hip width to find the diameter of the seat cushion and hip height and the vertical height of the chair from the floor. The results showed that the chair seat diameter from the 95th percentile was ∅35.4 cm and the height of the chair from the floor vertically from the 5th percentile was 83.4 cm

Keywords


ergonomics; anthropometry; sit-and-stand chair

Full Text:

PDF

References


Abdullah, S. & Sutanto, T. E. (2015). Statistika Tanpa Stress. Jakarta: TransMedia Pustaka.

Anggrianti, S. M., Kurniawan, B., & Widjasena, B. (2017). Hubungan antara postur kerja berdiri dengan keluhan nyeri kaki pada pekerja aktivitas mekanik section welding di PT. X. Jurnal Kesehatan Masyarakat (Undip), 5(5), 369-377.

Edwin, Y. (2017). Masalah saat harus berdiri lama dan cara mengatasinya. Retrieved 10 September 2020 from https://beritatagar.id/artikel/gaya-hidup/masalah-saat-harus berdiri-lama-dan-cara mengatasinya.

Iridiastadi, H. & Yassierli. (2014). Ergonomi Suatu Pengantar. Edisi Pertama. Bandung: PT. Remaja Rosdakarya.

Kuswana, W, S. (2015). Antropometri Terapan untuk Perancangan Sistem Kerja. Edisi Pertama. Bandung: PT.Remaja Rosdakarya.

Liliana, Y. P., Widagdo, S., & Abtokhi, A. (2007, November). Pertimbangan Antropometri pada Pendisainan. In Seminar Nasional III SDM Teknologi Nuklir: Yogyakarta.

Prasetyo, E., & Agri Suwandi. (2011). Rancangan Kursi Operator SPBU Yang Ergonomis Dengan Menggunakan Pendekatan Antropometri. In Prosiding Seminar Nasional dan Workshop Pemodelan dan Perancangan Sistem 2011 ISBN 978-602-19492-0-7.

Purnomo, H. (2013). Antropometri dan Aplikasinya. Edisi Pertama.Yogyakarta:Graha Ilmu.

Roscoe. (1982). Research Methods for Business. New York: Mc Graw Hill.

Sudaryono. (2018). Metodologi Penelitian. Edisi Pertama. Depok: PT. Raja Grafindo Persada.

Sugiyono. (2007). Statistika Untuk Penelitian. Bandung: CV. Alfabeta

Sutalaksana, I. Z., Anggawisastra, R., R., Tjakraatmadja, J.H. (1979). Teknik Tata Cara Kerja. Bandung: ITB.

Sutalaksana, I. Z. (2006). Teknik Perancangan Sistem Kerja. Bandung: ITB.

Wignjosoebroto, S. (2008). Ergonomi, Studi Gerak dan Waktu. Edisi Pertama.Surabaya: Prima Printing.

Yanto & Ngaliman, B. (2017). Ergonomi Dasar-Dasar Studi Waktu dan Gerakan untuk Analisis dan Perbaikan Sistem Kerja. Edisi Pertama. Yogyakarta: CV Andi Offset.




DOI: https://doi.org/10.24821/productum.v4i2.4613

Article Metrics

Abstract view : 439 times
PDF - 342 times

Refbacks

  • There are currently no refbacks.


p-ISSN 2477-7900  |  e-ISSN 2579-7328


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


Like & Follow Us