Integrasi Axiomatic Design, design for manufacture and assembly, dan rekayasa serempak dalam Desain Produk

Alkent Chenio, Rosnani Ginting, Aulia Ishak

Abstract


Product design faces challenges where designers need to know the parameters before the design process to minimize product development time, and products that are not suitable for manufacturing cause losses. This research is a narrative literature review of the integration of Axiomatic Design (AD), Design for Manufacture and Assembly (DFMA), and Concurrent Engineering (CE) to see the potential of integrating the three methods in product design. Eight journals from the last decade were analyzed to evaluate the impact of integration on product design. Results showed that the integration of the three methods was able to reduce the required design iterations along with a reduction in manufacturing costs and assembly time. The integration was able to identify and break down functional requirements with cross-functional collaboration from the early stages of design as well as streamlining the product and assembly process. In addition, the integration also provides manufacturing information for designers so that the product design is compliant from the manufacturing side. The combination of the three methods results in products that are easier to manufacture, reduce lead times and product costs. Therefore, this approach is highly recommended for the manufacturing industry to improve cost efficiency, time, and product quality.


Keywords


perancangan produk, tinjauan pustaka, rekayasa serempak, axiomatic design, design for manufacture and assembly

Full Text:

PDF

References


Albano, L. D., & Suh, N. P. (1994). Axiomatic design and concurrent engineering. Computer-Aided Design, 26(7), 499–504. https://doi.org/10.1016/0010-4485(94)90081-7

Antony, K. M., & Arunkumar, S. (2020). DFMA and Sustainability Analysis in Product Design. Journal of Physics: Conference Series, 1455(1). https://doi.org/10.1088/1742-6596/1455/1/012028

Arcidiacono, G., Matt, D. T., & Rauch, E. (2017). Axiomatic Design of a Framework for the Comprehensive Optimization of Patient Flows in Hospitals. Journal of Healthcare Engineering, 2017. https://doi.org/10.1155/2017/2309265

Bhalerao, P., & Bargal, N. (2014). Product Design: Challenges and Evaluation. IOSR Journal of Electronics and Communication Engineering, 9(4), 26–28. https://doi.org/10.9790/2834-09422628

Bhavesh Mistry, D. P. M. G., Drake, P., & Bhavesh Mistry, D. P. M. G. (1999). Study and Scope of DFMA and GD&T in manufacturing process: A case study on Dual Plate Check Valve. 1994(February), 1. https://doi.org/10.13140/2.1.2294.8642

Boothroyd, G., Dewhurst, P., & Knight, W. A. (2010). Product Design for Manufacture and Assembly. CRC Press. https://doi.org/10.1201/9781420089288

Du, Y., Cao, H., Chen, X., & Wang, B. (2013). Reuse-oriented redesign method of used products based on axiomatic design theory and QFD. Journal of Cleaner Production, 39, 79–86. https://doi.org/10.1016/j.jclepro.2012.08.032

Dwivedi, S. N., & Sobolewski, M. (1991). Concurrent Engineering: An Introduction. In CAD/CAM Robotics and Factories of the Future ’90 (pp. 3–16). Berlin, Heidelberg: Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-642-85838-3_1

El‐Haik, B. S. (2005). Axiomatic Quality. In Axiomatic Quality: Integrating Axiomatic Design with Six-Sigma, Reliability, and Quality Engineering. Wiley. https://doi.org/10.1002/0471714682

Elsaied, Ã., Soltan, H., & Hussein, M. (2020). Axiomatic Design for ‘X’: An Integrated Methodology for Product Design. (Dept. M. ( Production )). Bulletin of the Faculty of Engineering. Mansoura University, 39(1), 1–7. https://doi.org/10.21608/bfemu.2020.103089

Ferrer, I., Rios, J., & Ciurana, J. (2009). An approach to integrate manufacturing process information in part design phases. Journal of Materials Processing Technology, 209(4), 2085–2091. https://doi.org/10.1016/j.jmatprotec.2008.05.009

Firmansyah, M. M., & Jakaria, R. B. (2023). Implementasi Design For Assembly (DFA) Pada Desain Produk Oven. Jurnal PASTI (Penelitian Dan Aplikasi Sistem Dan Teknik Industri), 17(2), 271. https://doi.org/10.22441/pasti.2023.v17i2.012

Gibson, W. (2022). Product design and development. In Integrated Functional Sanitation Value Chain: The role of the sanitation economy. https://doi.org/10.2166/9781789061840_0019

Ginting, R. (2022). Perancangan dan Pengembangan Produk. Medan: USU Press.

Ginting, R. (2023). DFMA (Design for Manufacture and Assembly) Teori dan Aplikasi. Medan: USU Press.

Giudice, F., Ballisteri, F., & Risitano, G. (2009). A concurrent design method based on DFMA-FEA integrated approach. Concurrent Engineering Research and Applications, 17(3), 183–202. https://doi.org/10.1177/1063293X09343337

Gonçalves-Coelho, A. M., Mourão, A. J. F., & Pereira, Z. L. (2005). Improving the use of QFD with axiomatic design. Concurrent Engineering Research and Applications, 13(3), 233–239. https://doi.org/10.1177/1063293X05056787

Gupta, M., & Kumar, S. (2019). Design efficiency analysis towards product improvement using DFMA. 2019 8th International Conference on Modeling Simulation and Applied Optimization, ICMSAO 2019, 1–6. https://doi.org/10.1109/ICMSAO.2019.8880339

Hager, T., Wafik, H., & Faouzi, M. (2017). Manufacturing system design based on axiomatic design: Case of assembly line. Journal of Industrial Engineering and Management, 10(1), 111–139. https://doi.org/10.3926/jiem.728

Huang, G. Q. (1996). Design for X : concurrent engineering imperatives. Retrieved from https://api.semanticscholar.org/CorpusID:109883540

Ishak, A., Ginting, R., & Siallagan, S. (2024). Application of quality function deployment (QFD) and axiomatic design method for product design: study case compost waste product. Journal of Achievements in Materials and Manufacturing Engineering, 122(1), 31–41. https://doi.org/10.5604/01.3001.0054.4652

Ivanov, V., Pavlenko, I., Evtuhov, A., & Trojanowska, J. (2024). Product Design. https://doi.org/10.1007/978-3-031-44641-2_2

Jang, B. S., Yang, Y. S., Song, Y. S., Yeun, Y. S., & Do, S. H. (2002). Axiomatic design approach for marine design problems. Marine Structures, 15(1), 35–56. https://doi.org/10.1016/S0951-8339(01)00015-6

Johnsona, M. D., & Kirchainb, R. E. (2011). The importance of product development cycle time and cost in the development of product families. Journal of Engineering Design, 22(2), 87–112. https://doi.org/10.1080/09544820902960058

Julaeha, L. S., & Yustriana. (2022). Design of Goods and Services in Developing Business. EKONOMIKA45 : Jurnal Ilmiah Manajemen, Ekonomi Bisnis, Kewirausahaan, 10(1), 135–142. Retrieved from https://jurnaluniv45sby.ac.id/index.php/ekonomika/article/view/589

Krumenauer, F. Z., Matayoshi, C. T., Filho, M. S., Batalha, G. F., & Engineering, M. S. (2008). Concurrent engineering and DFMA approaches on the development of automotive panels and doors. Journal of Achievements in Materials and Manufacturing Engineering, 31(2), 690–698.

Lee, G. B., & Badrul, O. (2014). Optimization for sustainable manufacturing based on axiomatic design principles: a case study of machining processes. Advances in Production Engineering & Management, 9(1), 31–43. https://doi.org/10.14743/apem2014.1.174

Lu, W., Tan, T., Xu, J., Wang, J., Chen, K., Gao, S., & Xue, F. (2021). Design for manufacture and assembly (DfMA) in construction: the old and the new. Architectural Engineering and Design Management, 17(1–2), 77–91. https://doi.org/10.1080/17452007.2020.1768505

Mollajan, A., Iranmanesh, H., Khezri, A. H., & Abazari, A. (2022). Effect of applying independence axiom of Axiomatic Design theory on performance of an Integrated Manufacturing Information System: a computer simulation modeling approach. Simulation, 98(7), 535–561. https://doi.org/10.1177/00375497211062892

Musfiroh, H. (2020). Kajian komparatif perancangan dan produksi peralatan saji (Studi kasus CV Estetika Indonesia). Productum: Jurnal Desain Produk (Pengetahuan Dan Perancangan Produk), 3(8), 261–268. https://doi.org/10.24821/productum.v3i8.3326

Naiju, C. D. (2021). DFMA for product designers: A review. Materials Today: Proceedings, 46(February 2021), 7473–7478. https://doi.org/10.1016/j.matpr.2021.01.134

Prasad, B. (1996). Concurrent Engineering Fundamentals, Vol I: Integrated Product and Process Organization (Vol. 1). https://doi.org/10.13140/RG.2.1.2613.0005

Pullan, T. T., Bhasi, M., & Madhu, G. (2010). Application of concurrent engineering in manufacturing industry. International Journal of Computer Integrated Manufacturing, 23(5), 425–440. https://doi.org/10.1080/09511921003643152

Rauch, E., Matt, D. T., & Dallasega, P. (2016). Application of Axiomatic Design in Manufacturing System Design: A Literature Review. Procedia CIRP, 53, 1–7. https://doi.org/10.1016/j.procir.2016.04.207

Sapuan, S. M. (2017). Concurrent Engineering, Product Design, and Development. In Composite Materials. Elsevier Inc. https://doi.org/10.1016/b978-0-12-802507-9.00002-7

Sapuan, S. M., & Mansor, M. R. (2014). Concurrent engineering approach in the development of composite products: A review. Materials and Design, 58, 161–167. https://doi.org/10.1016/j.matdes.2014.01.059

Selvaraj, P., Radhakrishnan, P., & Adithan, M. (2009). An integrated approach to design for manufacturing and assembly based on reduction of product development time and cost. International Journal of Advanced Manufacturing Technology, 42(1–2), 13–29. https://doi.org/10.1007/s00170-008-1580-8

Setiawan, A., Ginting, R., & Ishak, A. (2024). Literature Review of Concurrent Engineering in Kansei Engineering and Ergonomic. Jurnal Sistem Teknik Industri, 26(2), 137–144. https://doi.org/10.32734/jsti.v26i2.14696

Sheikh, R., Abbasi, M., Talaei, A. A., & Tahmasbi, M. (2015). Dynamic Axiomatic Design (DAD): Applying the Independence Axiom in the Design of Social Systems. Procedia CIRP, 34, 125–130. https://doi.org/10.1016/j.procir.2015.07.012

Shirwaiker, R. A., & Okudan, G. E. (2008). Triz and axiomatic design: A review of case-studies and a proposed synergistic use. Journal of Intelligent Manufacturing, 19(1), 33–47. https://doi.org/10.1007/s10845-007-0044-6

Sibanda, V., Mpofu, K., Trimble, J., & Kanganga, M. (2019). Engineering Design Featuring the Life Cycle Approach for Reconfigurable Machine Tool. Procedia CIRP, 84, 948–953. https://doi.org/10.1016/j.procir.2019.04.174

Snyder, H. (2019). Literature review as a research methodology: An overview and guidelines. Journal of Business Research, 104(August), 333–339. https://doi.org/10.1016/j.jbusres.2019.07.039

Stjepandić, J., Wognum, N., & J.C. Verhagen, W. (Eds.). (2015). Concurrent Engineering in the 21st Century. Cham: Springer International Publishing. https://doi.org/10.1007/978-3-319-13776-6

Suh, N. (2001). Axiomatic Design: Advances and Applications.

Suh, N. P., Cavique, M., & Timothy, J. (2021). Design Engineering and Science. In Design Engineering and Science. https://doi.org/10.1007/978-3-030-49232-8

Syan, C. S., & Menon, U. (1994). Concurrent Engineering: Concepts, Implementation, and Practice. Chapman & Hall: Springer Science+Business Media Dordrecht. https://doi.org/10.1 007/978-94-011-1298-7

Widiyanti, W., & Tukiran, M. (2024). Customer Satisfaction in The Hospitallity Sector: a Narrative Literature Review. International Journal of Social and Management Studies (Ijosmas), 5(2), 11–17. Retrieved from http://www.ijosmas.org

Yazid, S., Ginting, R., & Panjaitan, N. (2024). Integration of Design for Manufacture and Assembly with Product Design in Product Design Improvement: A Systematic Literature Review. Jurnal Sistem Teknik Industri, 26(2), 128–136. https://doi.org/10.32734/jsti.v26i2.13643




DOI: https://doi.org/10.24821/productum.v8i1.14648

Refbacks

  • There are currently no refbacks.


p-ISSN 2477-7900  |  e-ISSN 2579-7328


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


Like & Follow Us