Optimasi proses pemindaian 3D untuk meningkatkan representasi digital produk keramik

Pande Putu Ranjip Astika, I Gusti Bagus Budi Dharma

Abstract


The digitalization of ceramic craft products is essential to improve the competitiveness and market reach of small-scale enterprises. However, two-dimensional visualization often fails to accurately represent the shape, color, and texture of these products. This study aims to optimize the three-dimensional (3D) scanning process using the EINSTAR Shining 3D Scanner to produce precise digital models. Experiments were conducted on ceramic mugs with three resolution levels (high, medium, low) and two scanning positions (normal and inverted) to obtain complete models. The results indicate that high-resolution scanning (0.2 mm) provides the best geometric and texture detail, while dual-position scanning effectively resolves coverage limitations. Comparisons between digital models and physical objects demonstrate high accuracy in terms of geometry and color, although micro-textures are only partially captured. These findings offer practical technical guidance for small-scale ceramic producers in selecting efficient scanning configurations, enabling improved digital product representation while maintaining manageable resource and processing demands,

Keywords


pemindaian 3D, produk keramik, resolusi tinggi, representasi digital, pemindai EINSTAR, geometri dan tekstur

Full Text:

PDF

References


Bisri, Fitra, S., Widyastuti, T., & Aria, R. R. (2024). Pengembangan UMKM untuk Meningkatkan Kesejahteraan Masyarakat Indonesia. Jurnal Ilmiah Ilmu Pendidikan (JIIP), 7. https://doi.org/10.37058/wlfr.v3i1.4719

Bugeja, A., Bonanno, M., & Garg, L. (2022). 3D scanning in the art & design industry. Materials Today: Proceedings, 63, 718–725. https://doi.org/10.1016/j.matpr.2022.05.069

Einstar.com. (2024, November 24). Einstar: Portable Handheld 3D Sacanner. https://www.einstar.com/products/prosumer-portable-3d-scanner.

Lukita, L., Syarief, A., Riyadi, S., & Sriwarno, A. (2021). Studi persepsi visual perempuan pengendara terhadap desain sepeda motor skuter matik di Indonesia. Productum: Jurnal Desain Produk (Pengetahuan dan Perancangan Produk), 4(1), 67-76. https://doi.org/10.24821/productum.v4i1.4064

Hewawalpita, S., & Perera, I. (2017). Effect of 3D Product Presentation on Consumer Preference in E-Commerce. IEEE.

Hewawalpita, S., & Perera, I. (2017, May). Effect of 3D product presentation on consumer preference in e-commerce. In 2017 Moratuwa Engineering Research Conference (MERCon) (pp. 485-490). IEEE. https://doi.org/10.1109/MERCon.2017.7980532

Lyubomirov, S., Asenov, S., Tokmakov, D., Kanevski, H., Shehova, D., & Petrova, S. (2023). Case Study of 3D Scanning and Processing to Create Virtual 3D Plant Objects for Education. In 2023 31st National Conference with International Participation, TELECOM 2023. https://doi.org/10.1109/TELECOM59629.2023.10409604

Pratama, R. F. (2025). Pengaruh Estetika Desain terhadap Persepsi Merek dan Keputusan Pembelian Konsumen di Pasar Internasional. Design Journal, 3(1), 31–40. https://doi.org/10.58477/dj.v3i1.199

Salvi, J., Fernandez, S., Pribanic, T., & Llado, X. (2010). A state of the art in structured light patterns for surface profilometry. Pattern Recognition, 43(8), 2666–2680. https://doi.org/10.1016/j.patcog.2010.03.004

Shining 3D. (2023). EINSTAR 3D Scanner User Manual V1.0.6. Shining 3D Technology Co., Ltd.

Kamar Dagang dan Industri Indonesia (2023). UMKM Indonesia. https://kadin.id/data-dan-statistik/umkm-indonesia/

Widyastuti, P. (2020). Pembelajaran 3D Printing sebagai metode perancangan produk kostum (Studi Kasus: industri cosplay). Productum: Jurnal Desain Produk (Pengetahuan dan Perancangan Produk), 3(7), 231-238. https://doi.org/10.24821/productum.v3i7.3378

Wu, C., Yang, L., Luo, Z., & Jiang, W. (2022). Linear Laser Scanning Measurement Method Tracking by a Binocular Vision. Sensors, 22(9). https://doi.org/10.3390/s22093572




DOI: https://doi.org/10.24821/productum.v9i1.17261

Refbacks

  • There are currently no refbacks.


p-ISSN 2477-7900  |  e-ISSN 2579-7328


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


Like & Follow Us