Proses pemanfaatan modul bonggol jagung berbentuk balok menjadi material utama desain lampu

Muhamad Ediyansyah, Andry Masri

Abstract


The result of the exploration of corncob is a module in the form of a block at this stage of the corncob research with this form will be used as the main component of the product, this research was conducted with a material exploration approach, to explore the potential material of corncob which is expected to be a product that has novelty value. so an experiment is needed on corncobs. The experiments carried out were (1) the development of the physical treatment of the previous square module which had been explored by the industry to find the potential contained in the corncob. (2) Experiment with the corncob square module by using assembly methods and techniques in order to obtain new shapes and potentials. The research was conducted to obtain a product design with an emphasis on material aspects in order to obtain the characteristics of the corncob material. This research provides new opportunities and hopes for the community to have new creations in utilizing the corncob module.

Keywords


exploration, corn cob, characteristics, lamp design

Full Text:

PDF

References


Andry, Sachari, A. (2015). Konsep permainan dalam eksplorasi material untuk pengembangan craft. Disampaikan pada Seminar Nasional Strategi Indonesia Kreatif Universitas Widyatama Bandung 19 Maret 2015. Retrieved from http://lib.itenas.ac.id/kti/wp-content/uploads/2017/12/08-KONSEP-PERMAINAN-DALAM-EKSPLORASI-MATERIAL-UNTUK-pengembangan-craft.pdf

Guspara, W. A. (2017). Pendekatan material sebagai alternatif untuk pengembangan produk (Using material approach as an alternative for product development). INVENSI (Jurnal Penciptaan dan Pengkajian Seni), 2(2), 33-42

Ismail, D. (2011). Uji Fisik Bonggol Jagung Olahan sebagai Alternatif Bahan Baku dalam Konsep Produk Fungsional. Jurnal Rekayasa Institut Teknologi Nasional, Vol XII (2). 1-13

Masri, A. (2010). Pendekatan Desain Bagi Industri Kerajinan Kreatif Sebuah Usulan Bagi Program Implementasi Ekonomi Kreatif Di Sektor Industri Kerajinan Indonesia. Disampaikan pada Seminar Nasional “Strategi UMKM & IKM Menghadapi “Asean China Free Trade Area” (ACFTA) dan Inplementasinya dalam upaya memperkuat dan mengembangkan kemampuan diri, Universitas Pakuan Bogor, 10 April 2010. Retrieved from http://lib.itenas.ac.id/kti/wp-content/uploads/2017/12/010-Pendekatan-Desain-Bagi-Industri-Kerajinan-Kreatif-Sebuah-Usulan-unpak.pdf

Masri, A, Pasaribu, Y.M. (Eds). (2018). Buku Craft dan Desain di Indonesia, Sudut Pandang Akademik dan Pelaku. Bandung. Aliansi Desain Produk Industri Indonesia.

Wahmuda, F., & Puspitasari, R. (2015). Pengembangan Desain Produk dari Tongkol Jagung Berbasis Industri Kreatif. In Prosiding Seminar Nasional Sains dan Teknologi Terapan SNTEKPAN III 2015, 627-262




DOI: https://doi.org/10.24821/productum.v4i1.3621

Article Metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


p-ISSN 2477-7900  |  e-ISSN 2579-7328


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.


Like & Follow Us